Professional mould removal in Melbourne: fixed price per room, cause found first

Remove mould with a treatment plan based on the affected area and its source. We assess the problem, confirm your fixed price before work begins, and explain what prevents mould from returning.

  • Effective and long-lasting results
  • Most treatments completed within 2–5 hours
  • Low-odour HOCl treatment and HEPA air filtration where required
  • ULV fogging where the extent of contamination calls for it
Enter your postcode
Most treatments take between two and five hours. Before treatment begins, your technician confirms the affected area, explains the recommended work and agrees on the final price with you. Eligible Fantastic Club members can use $60 in credits for this service.
Fully equipped Fantastic Cleaners technician documenting mould around a laundry window during an inspection

Mould help for renters, owners, landlords and businesses

  • Homeowners - winter condensation, bathroom ceilings, that one cold bedroom. Treat it once, properly, and learn what’s feeding it.
  • Tenants and landlords - Victoria's rental minimum standards require rooms to be free from mould and damp caused by or related to the building structure. Depending on the circumstances, structural mould and damp that make a property unsafe or insecure may also qualify as an urgent repair.
  • Property managers - fixed per-room pricing makes quotes to owners simple: no open-ended “assessment” invoices.
  • Offices, shops and commercial spaces - book a free 30-minute survey and get a scoped, fixed-price plan for the whole site.

How much does mould removal cost in Melbourne?

Mould area sizeSmall areaMedium areaLarge area
What it looks likeA patch around a window, or in one cornerA large section of one wall affectedMore than one wall, or the ceiling, affected
Fantastic Club price*$590$790$890
Non-members price$650$850$950
Typical duration2–3 hours~4 hours~5 hours

All treatment prices are per room. Additional work outside the agreed scope must be discussed and approved separately before proceeding.

*Fantastic Club members can apply $60 of credits to the standard price. Small areas take around 3 hours in most rooms and around 2 hours in hallways, landings and utility rooms.
*Residential inspection: $100 for approximately 30 minutes.
*Commercial survey: Free for approximately 30 minutes.
Enter your postcode

Why mould develops in Melbourne homes

Cold weather, condensation, water leaks and inadequate ventilation can create conditions that allow mould to develop indoors. In Melbourne, these problems are particularly noticeable during colder months when windows remain closed and moisture accumulates on cold surfaces.

Common warning signs include:
  • Black or dark patches around windows and in room corners
  • Mould on bathroom ceilings, walls and grout
  • Persistent musty smells in bedrooms, wardrobes or living areas
  • Paint that bubbles, peels or discolours
  • Recurring mould after household cleaning

Scrubbing it off with supermarket spray usually buys a few weeks. The colony’s roots stay in the surface, the spores stay in the air, and the damp stays in the wall - so it comes back. Professional treatment deals with all three at once.

Fantastic Cleaners technician taking moisture readings on a mould-affected laundry wall corner

When to stop scrubbing and call a mould specialist

Not every small patch of mould requires professional treatment. However, a specialist assessment is worth considering when:

  • Mould repeatedly returns after household cleaning.
  • Growth covers a large wall, ceiling or multiple surfaces.
  • You notice a persistent musty smell but cannot locate the source.
  • Mould has appeared following a water leak, flooding or ongoing condensation.
  • Mould has affected porous materials such as plasterboard, timber or carpet underlay.
  • You are managing a rental or commercial property and need the affected areas assessed and documented.

For extensive or recurring mould, professional assessment can help establish the extent of the visible problem and identify possible moisture sources.

GALLERY

Before and after our mould removal services

The same bathroom ceiling clean and mould-free after professional mould removal and treatment Before Grey mould spread across a bathroom ceiling above white shower tiles, before professional mould removal After
mould-removal-shower-ceiling-after Before Heavy black mould on a shower ceiling around the exhaust vent, before mould remediation After
Clean corner, walls and skirting boards of the same room after professional mould removal Before Black mould speckled across a ceiling corner above a door frame, before professional mould removal After
Fantastic Cleaners mould technician applying ULV dry fog treatment to a mould-covered bedroom wall

How our mould removal works

Our technicians follow a structured process to assess the affected areas, treat suitable surfaces and help you understand what is causing the mould.

  1. Walk-through and moisture check. The technician confirms every affected area, takes moisture readings and identifies the likely source - condensation, a leak, or poor airflow.
  2. Preparation and air protection. The work area is prepped and, where the job calls for it, HEPA air filtration runs while we work so disturbed spores are captured rather than spread.
  3. Antimicrobial treatment. Affected surfaces are treated with an HOCl-based (hypochlorous acid) solution that neutralises mould growth - low-odour, and far gentler on your home than harsh chlorine products.
  4. ULV dry fogging, where required. For contamination that has spread beyond a single patch, an ultra-fine mist carries the treatment to settled spores on surfaces you can't see or reach.
  5. Removal of the dead growth. Once neutralised, visible mould is carefully cleaned off all suitable surfaces.
  6. Prevention debrief. Before leaving, the technician walks you through what's feeding the mould and how to starve it - ventilation habits, humidity control, and any repairs worth making.

Mould inspection vs mould removal vs mould remediation

Understanding the difference helps you choose the right service and know exactly what your quote covers.

  • Mould inspection - An inspection assesses visible mould, the affected areas and possible moisture sources. Our standard residential inspection takes approximately 30 minutes and costs $100. Commercial surveys are free.
  • Mould removal - Mould removal focuses on treating and cleaning visible mould growth from suitable surfaces, such as affected walls and ceilings.
  • Mould remediation - Remediation is a broader process that may involve preparation, containment, air filtration, treatment, removal and recommendations for addressing moisture problems.

What does Fantastic Cleaners provide?

We assess each property before treatment and determine which measures are appropriate for the affected area. Depending on the job, this may include HOCl antimicrobial treatment, HEPA air filtration and ULV fogging.
Your technician explains the recommended scope and confirms the price before work begins.

What mould treatment can and cannot fix

Treatment neutralises and removes active mould growth. It is not a renovation, and it's fair you know the boundaries before you book:

What mould treatment removes

We treat visible mould and assess the likely moisture source, but structural repairs, plumbing work, waterproofing and ventilation upgrades are not included in our mould removal service. We will let you know exactly what needs fixing.

Why some stains remain

Stains can outlive the mould. On porous or painted surfaces, dark marks sometimes remain after the growth is dead. They’re no longer active mould - but they may need repainting to disappear completely.

When materials need replacing

Some materials are too far gone. Where mould has deeply colonised soft or porous materials - crumbling plasterboard, rotted timber, saturated carpet underlay - replacement, not treatment, is the honest answer. We'll tell you at inspection, not after payment.

Why mould may return

If the moisture stays, mould can return. No treatment on the market changes that. Our prevention advice exists precisely so yours doesn't.

Rooms we treat - and what we look for in each

  • Mould on the ceiling corner above a tiled shower - bathroom mould removal
    Bathrooms

    Ceilings, walls, grout and sealant lines, window reveals; the highest-humidity room in the house.

  • Bedrooms

    Corners, window frames and the walls behind wardrobes and bedheads, where airflow is lowest.

  • Mould on a kitchen splashback wall beside the cooktop, under the rangehood
    Kitchens

    Walls behind appliances, around rangehoods and under sinks, where steam and slow leaks meet.

  • Mould growing low on a living room wall beside the sliding door to the garden
    Living and dining rooms

    External-facing walls, ceilings and the spaces behind large furniture.

  • Black mould in the ceiling corner of a hallway landing at the top of the stairs
    Hallways and landings

    Dead-air zones that condensation loves, especially in older Melbourne homes.

  • Mould spreading around a laundry window and ceiling above the washing machine and dryer
    Utility and laundry rooms

    Around washing machines and dryers, where warm damp air does its work.

One flat rate applies to any room of a given mould size - a bathroom ceiling costs the same to treat as a bedroom wall.
*Treatment suitability depends on the material and condition of the affected surface. Where materials are too heavily damaged or porous, replacement may be necessary rather than cleaning.

Commercial mould removal in Melbourne

Mould can affect workplaces, retail premises, offices and other commercial properties, particularly in areas affected by leaks, condensation or inadequate ventilation.
Fantastic Cleaners offers commercial mould assessments to help businesses understand the affected areas and the treatment required.
Our commercial service includes:

  • A site survey to assess visible mould and affected areas.
  • A recommended treatment scope.
  • A fixed-price proposal based on the assessed work.
  • Appropriate treatment methods according to the property and affected surfaces.

Commercial inspections: Free 30-minute survey, subject to confirmation of the service scope.

Fantastic Cleaners technician wearing blue protective gloves while inspecting commercial mould in Melbourne

How to prepare for your mould removal appointment

1. Leave the mould as it is

No scrubbing or spraying before we arrive - the technician needs to see the full extent of the growth to size and treat it properly.

2. Clear a path to the problem

Move what you can away from the affected walls, corners and ceilings so every surface is reachable.

3. Give the room a break

Keep kids and pets out of the rooms being treated while we work, and have power and water available for our equipment.

Is professional mould removal safe?

Professional mould removal requires appropriate preparation and treatment methods for the affected surfaces and the extent of contamination.

At Fantastic Cleaners, we use an HOCl-based antimicrobial treatment and may use HEPA air filtration or ULV fogging where appropriate.

Before treatment, our technicians assess the affected area and explain any necessary precautions. Children and pets should remain away from the treatment area while work is underway, following the technician's instructions.

The appropriate treatment depends on the surface, moisture conditions and extent of mould growth. We explain the recommended approach before starting.

Meet the Fantastic Cleaners

Harjit
Harjit Mould Removal Specialist in Melbourne 5/5 119 ratings

Number of bookings: 738

With Fantastic Cleaners for: 9 years

Manpreet
Manpreet Mould Removal Specialist in Melbourne 4.5/5 341 ratings

Number of bookings: 1210

With Fantastic Cleaners for: 5 years

Ahmed
Ahmed Mould Removal Specialist in Melbourne 4.3/5 19 ratings

Number of bookings: 86

With Fantastic Cleaners for: 2 years

Mould removal FAQs

Q: How much does mould removal cost in Melbourne?
A: $650 per room for a small affected area (around a window or in a corner), $850 where a large section of a wall is affected, and $950 where mould has spread across more than one wall or the ceiling. A 30-minute residential inspection is $100, and corporate surveys are free. Fantastic Club members can apply $60 of credits.
Q: What happens after mould removal?
A: After treatment, your technician explains the work completed, any remaining staining or surface damage, and the moisture conditions that may contribute to further mould growth. You will also receive practical recommendations for managing humidity, improving ventilation and arranging any necessary plumbing or building repairs. Remember that removing existing mould does not automatically correct the underlying moisture problem. Keeping affected areas dry is essential to reducing the risk of recurrence.
Q: How long does professional mould removal take?
A: Two to five hours per room. Small areas take around 2–3 hours, a heavily affected wall around 4, and multi-wall or ceiling jobs around 5.
Q: Can’t I just remove the mould myself?
A: Small surface spotting on tiles or glass can be a DIY job. Call a professional when the mould keeps returning to the same spot, covers a large section of wall, has reached porous surfaces like plasterboard or ceilings, appeared after a leak, or when you can smell it without finding it - those are signs the roots and the moisture source have outgrown the spray bottle.
Q: Do you remove black mould?
A: Yes. Colour doesn’t change the method: black mould gets the same inspection, containment, HOCl treatment and removal as any other visible growth. Note that on porous surfaces, dark staining can remain even once the mould is dead.
Q: Will the mould come back after treatment?
A: Treatment neutralises and removes the existing growth, but mould returns wherever moisture persists. That’s why every job ends with the technician showing you the moisture source and how to fix or manage it - deal with the damp, and the treatment lasts.
Q: Do you fix the leak or ventilation problem that caused the mould?
A: No - repairs aren’t part of the treatment service. What you will get is a clear diagnosis of where the moisture is coming from, so the right trade can fix it (or so you can manage it with ventilation and heating habits).
Q: Is the mould inspection free?
A: Residential inspections are $100 for a 30-minute visit that maps the mould, finds the moisture source and locks in your fixed price. For corporate and commercial clients, the 30-minute survey is free.
Q: Can you treat a rental property?
A: Yes - tenants, landlords and property managers all book this service. Victorian minimum rental standards make mould and damp a legitimate repair issue, so a documented inspection is useful evidence for either side.
Q: Why are there stains left after mould removal?
A: On painted and porous surfaces, mould can permanently discolour the material it grew on. Treatment kills and removes the growth; the shadow it leaves sometimes needs a coat of paint. You’ll be told at inspection if that’s likely.
Q: Do you use fogging, and is it extra?
A: We use ULV dry fogging when contamination has spread beyond a defined patch - it carries the antimicrobial treatment to settled spores across the whole space. It’s applied where the job requires it.
Q: Which Melbourne suburbs do you cover?
A: We cover Greater Melbourne - inner city, east, north, west and south-east, from Werribee to Ringwood and Epping to Frankston. The quickest way to check your address is to enter your postcode in the booking form: it confirms coverage and shows real availability instantly. Prices don't change by suburb - every room is a fixed $650, $850 or $950 based on the size of the mould, anywhere we service.
View all FAQ

Mould removal across Greater Melbourne

A coverage map of Greater Melbourne

Our mould technicians work across Greater Melbourne - from inner-city apartments with bathroom ceiling mould to weatherboard homes in the outer suburbs fighting winter condensation. The price is the same wherever you are: fixed per room, set by the size of the affected area, never by your postcode.

Enter your postcode below to confirm coverage and see availability for your address - if we can't reach you yet, the booking form will tell you straight away, before you've spent a minute more.

Enter your postcode

COMBINE AND SAVE

Sort the damp, then the rest

Book professional mould removal in Melbourne

Get a fixed per-room price, a 30-minute inspection, and a treatment plan that deals with the mould and its cause.